L-Acoustics A15 Focus Owner'S Manual Download Page 58

Page: 58 / 98

Rigging procedures

Flying a radial array with A15-LIFT

Type of deployment

own radial array
one A15-LIFT for three enclosures
LA-SLING2T or a bridle (optional)

Rigging accessories

Ø12 mm shackles WLL 1 t (provided)

Min number of operators

Risk of falling objects

Verify that no unattached items remain on the product or assembly.

Additional safety with A15-LIFT

On each enclosure on which A15-LIFT is secured, secure a DIN580 eye bolt to the dedicated insert to implement

a secondary safety.
Use a shackle and a steel wire rope. Make sure the steel rope is as tensed as possible without bearing the load.

A15-LIFT quantity and position

Use one A15-LIFT for up to three enclosures in the array.
Do not leave more than two adjacent enclosures unsupported.
Refer to

APPENDIX A: Authorized congurations with A15-LIFT

(p.94).

Risk of tilting

When using a single motor or a bridle, make sure the array is symmetrical.

A15 owner's manual (EN) version 1.2

Summary of Contents for A15 Focus



































































































Search results

Summary of Contents for A15 Focus

Reviews:

Related manuals for A15 Focus

Brands by name

Popular brands

L-Acoustics A15 Focus, Owner'S Manual

Search results

Summary of Contents for A15 Focus

Reviews:

Related manuals for A15 Focus

Brands by name

Popular brands