OPERATING INSTRUCTIONS
CONTROL PANEL
ML900 Main Control Panel
ML400 Auxiliary Control Panel
These easy to use controls have been pre-programmed to be “plug and play”. Turn the power on, adjust
the desired temperature and the system is ready to go. If there are situations that require additional
filtering time, the filter settings can be customized to any special requirements. Simple to use and easy
to read, the Control System makes using the spa effortless.
CONTROL PANEL OPERATION
Please note: The pumps have an automatic timeout (shut-off) programmed 40 minutes after the pump
is activated. The low speed spa pump will remain running if there is a call for heat, and will continue to
do so until the set temperature is reached.
1.
Swim 1 key:
Swim 1
key is associated with the lower swim jet. Press the
Swim 1
key once to turn on the swim
pump #1. Press the
Swim 1
key again to turn off the pump.
2.
Swim 2 key:
Swim 2
key is associated with the upper right swim jet. Press the
Swim 2
key once to turn the
swim pump #2 on low speed. Press the
Swim 2
key a second time to turn the swim pump #2 on
high speed. Press the
Swim 3
key the third time to turn off the pump.
3.
Swim 3 key:
Swim 3
key is associated with the upper left swim jet. Press the
Swim 3
key once to turn the swim
pump #3 on low speed. Press the
Swim 3
key a second time to turn the swim pump #3 on high
speed. Press the
Swim 3
key the third time to turn off the pump.
14
rev. 2011-5-26
4. Leveler
key:
