15
Battery Care and Use Instructions (cont’d)
Leaving charged battery on charger for
extended period of time will reduce
battery life and performance.
6.
Remove the battery from the battery charger.
7.
Repeat steps 2. thru 6. three times prior to
using battery.
Charging Battery After Normal Use
Use the ac/dc battery charger to charge the battery
after exhaustion as follows:
1.
Plug battery charger into AC outlet or car
battery adapter.
•
Power LED will light indicating charger
/refresher is powered by either the
AC adapter or the DC car plug.
2.
Insert battery in battery charger adapter.
•
Place battery on battery charger with about
1/8 inch hanging over edge.
•
Press battery down against spring–loaded
pins and slide battery in to place.
•
Charge LED lights (red) indicating that the
unit is fast–charging a battery.
3.
When battery is fully charged, the charge
indicator lights (green).
4.
Remove the battery from the battery charger.
CAUTION
Summary of Contents for 3261607 Thermal-Eye 250D
Page 37: ...37 Notes ...
Page 38: ...38 Notes Continued ...
Page 39: ...39 Warranty Information L 3 COMMUNICATIONS INFRARED PRODUCTS ...