KS8000 manual www.kystar.com.cn
9
Use the supplied RS232-RJ11 connection cable. One end is connected to the
COM1 port of the processor, and the other end is connected to the serial port of the
PC (supports USB to nine-pin serial port).
II. Modify COM port
In software communication, "optional COM connection":
Under normal circumstances, the software will automatically recognize the COM port,
users do not need to set it, just click OK. However, in some cases, the PC may have
multiple COM ports at work, causing software recognition errors. At this time, you
need to select the COM port (please try in order).
III.Establish communication
During software communication, select "COM connection" and click "OK" directly.
If the connection is successful, a prompt box as shown in the figure below will pop up,
and click "OK".
5.Software Settings
1.Output settings
