KS8000 manual www.kystar.com.cn
10
After the device is successfully connected, click "Screen Configuration" under the
"Main Function Area" to pop up the screen parameter setting interface. The six dotted
field boxes in the operation area correspond to the device output ports (from left to
right as seen from the back). The loading of each output port and the arrangement of
output ports are set under this interface. As shown below:
The "screen resolution" is the maximum resolution that can be output by each
output port, and is generally greater than or equal to the resolution of each sending
card or each display.
The "row" and "column" can be set as required. The "1920" above the layout and the
"1080" on the left can be modified according to the actual number of loaded points.
Double-clicking the value can modify it.
For example, the screen size is 6016 * 2080, and it is loaded with six sending cards.
The loading size and arrangement are shown in the following figure:
Then, the screen parameter setting interface needs to be set as follows:
2048
1040
1040
2048
2048
2048
1920
1920
1040
1040
