KS8000 manual www.kystar.com.cn
13
Among them, click "Properties" to see:
classification
Function description
Save settings
Archive the currently set parameters, a total of 12 gears
Sticky
Bring the current window to the top
Set at the end
Bring the current window to the bottom
Attributes
Set the properties of the current window
Panorama →
Partial
Switch between panorama and partial mode: panorama is
the entire picture of the input signal, and partial is the
partial picture of the input signal (select the size and
position of the partial picture by changing the input zoom in
the window properties; if not set, and the window size is
smaller than the input Signal resolution, the default partial
screen size is the same as the window size, starting point is
0,0)
full screen
Cover the entire screen of the current window
Intra-unit
maximization
The simulation operation area is divided into several areas
by dashed lines and solid lines. The current window may
span multiple areas but is not completely filled with these
areas. Through this operation, the current window can be
filled with the spanned areas.
reduction
Restore window size before adjustment (for full screen or
in-cell maximize operation)
close
Close (delete) the current window
All close
Close all windows in the simulated operating area
