WARNING
Protective Ground
To prevent an electric shock hazard, be sure to ensure protective ground before connecting the AC power cable to
a 3-prong wall outlet. If no 3-prong wall outlet is available, be sure to ground the UCAM-65A via the “GND”
terminal before connecting the AC power cable.
For Electrical Operator Safety
To prevent an electric shock hazard, operators must be cautioned not to cut the protective grounding conductor or
disconnect it from the GND terminal.
Confirmation of Protective Ground
To prevent an electric shock hazard, be sure to confirm safe protective ground before operating the UCAM-65A.
If anything seems abnormal in the protective ground, fuse holders, etc., do not operate the UCAM-65A.
Power Supply
To prevent a fire hazard, before connecting the AC power cable, be sure to confirm the local line voltage is
matched with the operating voltage specified for the UCAM-65A.
Power Cable and Power Outlet
To prevent electric shock or fire hazards, connect the accessory power cable to a 3-prong wall outlet .
If no 3-prong wall outlet is available, ground the UCAM-65A through the GND terminal and then, connect the
power cable to a 2-prong wall outlet via the accessory 3P-2P conversion adapter.
Do not disconnect the grounding conductor during measurement and before disconnecting the power cable.
Operators must also be cautioned that use of an extension power cable with no grounding conductor voids the
protective function.
Fuse
To prevent a fire hazard, be sure to use a fuse providing the same rating (current, voltage, type) as specified for the
UCAM-65A.
Do not use any fuse other than specified. Do not short-circuit the fuse holder.
When replacing the fuse, disconnect the AC power cable from the wall outlet in advance.
External Connection
To prevent an electric shock hazard, ensure the safe protective ground of all concerned instrument and then,
connect the UCAM-65A to the measuring objects and external devices, PC, etc.
Inflammable Gaseous Environment
To prevent fire and explosion hazards, do not operate the UCAM-65A where it is exposed to inflammable gases,
inflammable vapors or inflammable dust.
- iii -
