Kyoritsu Electrical Instruments Works KEW 4506, Instruction Manual

Page: 11 / 44

̶ 9 ̶
4. Accessories
● Carrying case MODEL 9161
● Others:
(1) KAMP10 (1500 mm) test lead with IEC connector/
MODEL 7284 (720 mm) test lead with IEC connector
(2) Strap belt
(3) Two size AA Alkaline batteries
(4) Instruction manual
● Optional accessory
Signal source KEW 8343 (Diameter 24 mm)
5. Getting started
Before starting to use KEW 4506, check the following points.
See “ 9. Battery replacement ” in this manual and insert batteries.
(1) Hold down power button 1 sec. to power on KEW 4506.
A long press (1 sec. or longer) is required to power on the tester
for safety purpose. A long press of power button is also required
to power off the tester.
(2) Confirm that battery level indicator isn’t displayed at the
upper left on the LCD.
Note
● Use of size AA Alkaline battery is recommended. The battery
level indicator may not be properly displayed if the
other types of batteries are used.
Battery level is extremely low when the battery indicator is
displayed on the LCD. To perform further measurements, please
refer to “ 9. Battery replacement ” and replace batteries with new
ones.