Kyoeisha BARONESS LM56GC, Owner'S Operating Manual

Page: 74 / 89

Removing/Installing The Bed Knife
Removing The Bed Knife
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
While operations are performed with the front
of the machine raised, it may fall.
Securely support the machine.
Remove the bed knife base COMP.
Place the bed knife base COMP on a stable
workbench.
Remove the bed knife by loosening the
screw with a hammer driver or punch.
2
3
1
mbl5jl-001
Removing The Bed Knife_001
1 Bed knife base
2 Bed knife
3 Screw
1.
2.
3.
Installing The Bed Knife
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
While operations are performed with the front
of the machine raised, it may fall.
Securely support the machine.
Important
Be sure not to scratch the bed knife base
surface where the bed knife shall be mounted.
Remove rust and dust.
Important
Replace the old screws with new ones.
Tighten the screws uniformly with a
hammer driver.
2
3
1
4miqko-001
Installing The Bed Knife_001
1 Bed knife base
2 Bed knife
3 Screw
Note:
When installing the bed knife, first tighten
the center screw, and then tighten from
center outwards, alternating between left
and right sides.
1.
LM56GC
・
LM66GC / LM66TC
Maintenance
Page 5-20
Maintenance Work