Kyoeisha BARONESS LM56GC, Owner'S Operating Manual

Page: 59 / 89

Maintenance Item
Before Work
After Work
Every 10 hrs. Every 20 hrs. Every 25 hrs. Every 50 hrs.
Every 100 hrs. Every 300 hrs. Every 500 hrs.
Every year
Every 2 years
When Required
Remarks
Cutting section
Replace front roller oil seals △
Replace grease inside gearcase △
Clean and Grease Bedknife
Eccentric Bushes
○
Adjust cutter adjustment spring ○
Backlap blades ○
Regrind blades (Reel cutter )
○
Grind/Replace blades
as and when required
*1: Consult your local Baroness Dealer for this service.
*2: Refer to the Engine's Owner's Manual.
The values for consumables are not guaranteed.
Adjusted Values
Cutter adjustment spring 50.0 mm (1.97 in) Length of coil spring
Reel cutter shaft bearing preload
spring
11.5 mm (0.453 in) Total length of spring
Reel cutter rotation torque 0.8 - 1.0 N
・
m (8 - 10 kgf
・
cm)
Engine clutch 0.5 - 1.0 mm (0.020 - 0.039 in)
Gap between engine clutch and
clutch facing
Operation distance of clutch plate 1.0 - 2.0 mm (0.039 - 0.079 in)
Engine clutch spring 61.0 mm (2.40 in) Total length of spring
･
･
･
Maintenance
LM56GC
・
LM66GC / LM66TC
Maintenance
Page 5-5
Maintenance Schedule