Kyoeisha Baroness LM1808, Owner'S Handling Manual

Page: 12 / 44

7-3 Change of Mission Oil
The oil filling port is located at the top on the right side of the
mission case.
The drain port is located at the bottom on the right side of the
mission case.
First time after 50-hour operation
Second time and later every 300 hours or every year
Oil quantity approx. 2 litres
Specified oil Oil No. 90 for automobile
7-4 Oiling and Greasing
Always supply oil to moving parts and periodically grease them with
a
grease nipple.
7-5 Inspection of Parts
Check and maintain bearings, various seals, belts, pulleys, wires,
tires, plugs, etc. periodically, and replace parts as necessary.
Drain port
Oil filling port
7-6 Maintenance List
◆Do maintenance earlier than the time shown below as necessary.
50h
Inspection/supply of engine oil
Change of engine oil
Cleaning of ignition plugs
Cleaning of air cleaner
Cleaning of fuel strainer
Adjustment of ignition plug clearance
Removal of cylinder head carbon
Cleaning of carburetor
Checking/fitting of inlet valve/exhaust valve
Overhaul
Inspection of tire air pressure
Inspection of looseness of screws
Inspection of fuel level
Inspection of oil leakage
Inspection of cutting quality of blade
Oil supply to sliding portions
Inspection of belt tension
Adjustment of wires
Maintenance item Hourly 50H 200H Yearly
Engine
Machine
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
(Fig. 15)
Table 2
- 1 0 -