Kyocera TJEP RE-BAR 40, User Manual

Page: 66 / 92

66
5.1.4. Insert the wire coil with left side inwards,
with the wire-end upwards and forward. Close
the reel stay and secure the reel stopper.
5.1.5. Insert the tip of the wire into wire guide
C, through the gap of the feeding gears and all
the way into the machine arm.
Note: the tip of the wire must be aligned;
otherwise, it can get caught when feeding it into
the RE-BAR tier.
If the window is dirty and it is difficult to determine
the position of the wire guide C, clean the inside of
window with a soft cloth.
5.1.6. Push the release stopper.
Make sure that the release lever is back in original
position and that the feeding gears are clamping
the wire.
5.1.7. Remove all tape from the wire coil.
5.1.8. Make sure that the wire is tight and firm.
Prevent the wire from curling up behind the wire
coil. This may cause a jam.
Reel stopper
Reel stay
Wire
guide C
Wire guide
Release
stopper
Release
lever
Feeding gears
Tape