Kyocera TJEP RE-BAR 40, User Manual

Page: 60 / 92

60
2.1. Use appropriate protection gear.
Employer and operator must make sure that the
operator uses proper eye protection when the tool
is used. This protection must comply with current
laws and norms.
2.2. Ear protection can be necessary.
On a lot of work sites, it can be necessary to wear
ear protection, to avoid permanent damage to the
ears. Employers and employees must make sure
that proper ear protection can be found and is
used on the work site.
2.3. No children near the RE-BAR tier.
Do not allow spectators, especially children, near
the machine while working with it.
2.4. Do not use the RE-BAR tier near flammable
substances.
Never use the RE-BAR tier near any flammable
substances or fumes. The fumes from these can be
sucked into the engine and cause an explosion.
2.5. Do not use the RE-BAR tier in wet or damp
environments.
If the RE-BAR tier is used in direct rain or water,
damp environments or similar, the risk of getting an
electrical chock is increased. Do not leave the RE-
BAR tier where it can be exposed to this.
2.6. Check the parts of the RE-BAR tier before
inserting the battery.
Check that all screws are tightened properly.
Improper tightening of screws can result in an
accident or breakage. If parts are missing or need
to be repaired, contact your dealer immediately.
Use only parts approved by the manufacturer.
2.7. Set the main switch to 0 position and lock
the trigger when changing or adjusting the wire
coil or if a fault occurs and the machine cannot
be used.
If the machine is left on, it may cause damage.
2.8. Keep clear of the wire coil during use of
the RE-BAR tier.
If not, it can cause serious injury.
2.9. Keep clear of the curl guide during use of
the RE-BAR tier.
You may get caught in the wheels and suffer
serious injury.
2.10. Do not point the RE-BAR tier towards
others during use.
People can get hurt if they are caught in the
machine during use. When tying, be careful and
stay clear of the machine mouth and curl guide.
2.11. Do not touch the trigger unless you have
to.
When carrying the RE-BAR tier and when not
tying, remember to set the main switch to 0
position, and lock the trigger. If not, you will risk
activating the RE-BAR tier unintentionally and
cause a dangerous situation.
2.12. Do not use the RE-BAR tier during a
malfunction.
If the RE-BAR tier does not work correctly, set
the main switch to 0 position and lock the trigger,
before checking what is wrong. If necessary,
contact your dealer and have the RE-BAR tier
repaired.
2. Safety instructions
Caution
To avoid serious injuries to persons or property, please read these safety instructions carefully and make
sure you understand them.
Points of attention when using the RE-BAR tier.
Using the RE-BAR tier for other purposes or other applications than described in this manual can result
in serious accidents. Please make sure that you follow all instructions in the manual. People who have
nothing to do on the work site, especially children, should be kept out of the work site and should not
have access to this equipment.