Kyocera TASKalfa 3051ci, Service Manual

Page: 286 / 317

2L6/2N6/2N5/2N4
1-4-285
(13) Offset occurs.
Print example
Defective part Check description Corrective Action
1
Paper 1. Check that the type of the
paper used falls within the
range of specifications.
2. Check the settings of the
type and weight of the paper.
1. If the type of the paper being used falls
outside the requirements, replace and use
a suitable type of paper.
2. If the settings made for the paper being
used is inadequate, configure the settings
according to the paper being used.
2
Intermediate trans-
fer belt unit Check the transfer cleaning
volatage by U107.
(see page 1-3-87) 1. If the transfer cleaning volatage by U107 is
not its default, reset it to the default.
2. Replace the intermediate transfer belt unit.
(see page 1-5-62)
Check if offsets are occurred at a
pitch of the outer circumference
of the intermediate transfer belt.
If an offset happens at a pitch of the outer cir-
cumference, clean the intermediate transfer
belt.
3
Fuser unit Check if the fuser unit roller is
dirty.
If the fuser unit roller is dirty, replace the unit.
4
Fusing
temperature set-
ting Check the fusing temperature
value by U161.
(see page 1-3-110) If the fusing temperature value by U161 is not
its default, reset it to the default.