manualshive.com logo in svg

Kyocera TASKalfa 180, Operation Manual

Share
Download
Kyocera TASKalfa 180 Operation Manual Download Page 133

Troubleshooting 

OPERATION GUIDE

8-11

8

Multi Purpose Tray (except J10)

IMPORTANT: 

In the case where 

J20

 is displayed, refer to Paper misfeed in the Left Cover internal section and 

remove the paper.
In the case where 

J40

 is displayed, refer to Paper misfeed in the Left Cover internal section and remove the 

paper.
When removing jammed paper, do not pull it out from the MP tray side.

Left Cover (J20, J30, J40 to J50, J52 to J57, J60, J61))

When the paper misfeed has occurred in the Left Cover internal section, use the procedure below to clear it.

IMPORTANT: 

The drum section inside the main body is sensitive to scratches and contaminants. When 

removing paper, be careful not to touch it or scratch it with your watch, ring, etc.

1

Pull the left cover handle up to open the left cover.

CAUTION: 

The fixing unit is extremely hot. Take sufficient care when working in this area, as there is 

a danger of getting burned.

2

Remove the jammed paper without tearing it.

3

If the optional duplex unit is installed, raise the 
duplex unit and remove any paper.

NOTE: 

If the paper does happen to tear, remove any 

loose scraps from inside the machine.

4

Close the left cover.

Summary of Contents for TASKalfa 180





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands