1
Getting Started
1
G
ETTING
S
TARTED
Installing the battery
Your
Strobe
phone comes with a removable
lithium ion (LI Ion) battery.
Fully charge the
battery before using the phone
.
To install the battery:
1.
Hold the phone face
down.
2.
Locate the groove on
the left side of the
phone. Unsnap the
hooks and remove the
back cover.
3.
Place the battery in the
phone casing with the
metal contacts facing
the right side of the
phone.
4.
Replace the back panel
by sliding the notches
into the openings on
the left side.
5.
Snap the back panel
into place.
Charging the battery
You must have at least a partial charge
in the
battery to make or receive calls.
To charge the battery:
1.
Connect the AC adapter to the jack on the
bottom of the phone. Do not force the AC
adapter into the jack. Make sure the arrow is
face up as shown.
2.
Plug the adapter into a
wall outlet.
The battery icon in the
upper-right corner of the
screen tells you whether the
phone is:
• Charging (the icon is
animated)
• Partially charged
• Fully charged
Note:
The battery will not charge if you use the
phone while it is connected to an AC adapter.
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Note:
Before removing the battery, make sure the
phone is powered off.
82-N8758-1EN.book Page 1 Monday, February 6, 2006 10:36 AM
