manualshive.com logo in svg

Kyocera KM-C2630, Operation Manual

Share
Download
Kyocera KM-C2630 Operation Manual Download Page 290

Section 9  TROUBLESHOOTING

9-14

Misfeed inside the left cover

The screens shown below indicate that there is a misfeed inside left 
side drawer or in the copy eject area. Perform the following 
procedure to remove the jammed paper.

Inch specifications

Metric specifications

1

Remove all of the copies from the copy storage table.

2

Open the left cover. 

3

Taking care not to tear the jammed paper, pull it from the 
left cover.

NOTE

If the paper tears, remove all of the remaining pieces from 
inside the left cover.

4

Close the left cover.

Paper misfeed.

JAM

1. Open left cover.
2. Remove paper.
3. Pull out fuser unit.
4. Check the inside of machine and 

Remove paper if inside.

5. Open cover of fuser unit.

Remove paper if inside.

6. Close fuser unit,

close cover.

Paper misfeed.

JAM

1. Open left cover.
2. Remove paper.
3. Pull out fuser unit.
4. Check the inside of machine and 

Remove paper if inside.

5. Open cover of fuser unit.

Remove paper if inside.

6. Close fuser unit,

close cover.

Summary of Contents for KM-C2630

































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands