Kyocera KM-3035, Operation Manual

Page: 87 / 152

Section 6 COPIER MANAGEMENT FUNCTIONS
6-17
4 Verify that this is the ID-code that you want to delete, and
touch the “Yes” key.
The touch panel will return to the screen in step 3.
Inch specifications
ID-code:
Name to display:
0007
1st Sales Dept.
Are you sure you want to delete this ID-code?
Yes No
Stop
Metric specifications
ID-code:
Name to display:
0007
1st Sales Dept.
Are you sure you want to delete this ID-code?
Yes No
Stop
NOTE
If you want to delete another ID-code, repeat steps 3 and 4.
5 Touch the “Close” key.
The touch panel will return to the screen in step 2.
●
Change registered information
Perform the following procedure when you want to change a
previously registered department name or the corresponding ID-code.
1 Access the copy management menu screen.
(See “(2) Accessing the copy management menu screen” on
page 6-3.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Register
orig. size Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management Bypass
setting
Document
Management Register
orig. size Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
Touch the “Management edit” key.
The “Management edit” screen will be displayed.
Inch specifications
Close
Each Mgt.
Total Management
total
Managem. Total
Default setting
Register/Sett.
Management
Def. Set. Management
edit
Off
On
Management
Management
Metric specifications
Close
Each Mgt.
Total Management
total
Managem. Total
Default setting
Register/Sett.
Management
Def. Set. Management
edit
Off
On
Management
Management