Kyocera KM-3035, Operation Manual

Page: 143 / 152

Section 8 MAINTENANCE AND OPERATION INFORMATION
8-5
13 Pull the electrostatic section out as far as it will go and then
push it back into the copier to a point just BEFORE the roller
A
touches the white pad of the grid cleaner.
Repeat this step a few times.
IMPORTANT!
DO NOT push the electrostatic section all the way back into the copier
in this step as that may result in problems appearing in the printed
images.
14
With the electrostatic section pulled out about 2 inches
(5 cm), remove the grid cleaner and then push the
electrostatic section all the way back into the copier.
15 Fit the new waste toner box into the copier.
<Cleaning the related parts>
10 Push the electrostatic section (with the blue handle) to the
right and then pull it out about 2 inches (5 cm).
11 Remove the cap from the grid cleaner.
12 Attach the grid cleaner to the machine body aligning with the
notches.