Kyocera KM-3035, Operation Manual

Page: 85 / 152

Section 6 COPIER MANAGEMENT FUNCTIONS
6-15
2 Select “Printer limitation” under the “Setting item” column on
the left side of the touch panel and then touch the “Change #”
key.
The “Printer limitation” screen will be displayed.
Inch specifications
Close
0007
1st Sales Dept.
Default setting - Management - Management edit
Limit in use
Change #
Value Setting item
Copy limitation
Printer limitation
No limit
No limit
Scanner limitation No limit
Fax Transm. Limitation No limit
Metric specifications
Close
0007 1st Sales Dept.
Default setting - Management - Management edit
Limit in use
Change #
Value Setting item
Copy limitation
Printer limitation
No limit
No limit
Scanner limitation No limit
Fax Transm. Limitation No limit
3 To set the maximum number of printouts that can be made
under this ID-code, touch the “Counter limit” key and proceed
to the next step.
To allow unlimited printing, touch the “No limit” key, and to
cancel printing privileges completely, touch the “Is not
permitted” key and proceed to step 5.
Inch specifications
Close Back
Management - Management edit - New register
Printer limitation
No limit
Counter
limit
Is not
permitted
Metric specifications
Close Back
Management - Management edit - New register
Printer limitation
No limit
Counter
limit
Is not
permited
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4 Use the numeric keys on the keypad to enter the maximum
number of printouts that can be made under this ID-code.
The printing limit can be set to any 1-page increment up to
999,999.
Inch specifications
Close Back
Management - Management edit - New register
Printer limitation
No limit
Counter
limit
Is not
permitted
Clear
999,999
(1~999,999)
Limited value
Metric specifications
Close Back
Management - Management edit - New register
Printer limitation
No limit
Counter
limit
Is not
permited
Clear
999,999
(1~999,999)
Limited value
5 Touch the “Close” key.
The touch panel will return to the screen in step 2.