Kyocera KM-3035, Operation Manual

Page: 139 / 152

8-1
Section 8 MAINTENANCE AND OPERATION
INFORMATION
1. Cleaning the copier
CAUTION
For safety purposes, ALWAYS remove the power
plug from the outlet when performing cleaning
operations.
●
Cleaning the original cover
Lift open the original cover. Wipe the back side of the original cover
with a soft cloth dampened with alcohol or a mild detergent.
* Never use thinner or other organic solvents for this purpose.
●
Cleaning the platen
Lift open the original cover. Wipe the platen with a soft cloth
dampened with alcohol or a mild detergent.
* Never use thinner or other organic solvents for this purpose.
* If soiling, such as black lines appear on the copy while using the
optional Document Processor, the slit glass
a
is soiled.
Wipe the slit glass with a soft dry cloth.
* Never use water, thinner, organic solvents or alcohol.
NOTE
When the slit glass becomes dirty, “Clean the slit glass for original fed
from DP.” [“Clean the slit glass for original fed.”] may appear. In this
case, perform the cleaning operation on the slit glass and then touch
the “End” key.
Inch specifications
Clean the slit glass for original fed from DP.
Open the document processor.
Clean the surface of narrower glass
located at left with a dry cloth.
Please close the document processor.
Press END key
If the slit glass is dirty, black line
will appear on the copy.
End
Metric specifications
Clean the slit glass for original fed.
Open the document processor.
Clean the surface of narrower glass
located at left with a dry cloth.
Please close the document processor.
Press END key
If the slit glass is dirty, black line
will appear on the copy.
End
●
Cleaning the separator
NOTE
To keep the best copying quality, perform cleaning periodically
(approximately once a month) using the following procedure.
1 Open the front cover.
a