Get Started
9
3. Plug the other end of the USB cable into the AC adapter, and then plug it into an
electrical outlet. Be sure to use the AC adapter that came with your phone.
4. When charging is complete, remove the cable from the port and close the cover. Press
around the edges of the cover to ensure that it is securely closed.
Warning:
Make sure the USB/Charger port cover is securely closed when the port is
not in use.
Battery capacity
Your phone is equipped with a Lithium ion (Li-ion) battery, so there are no negative effects from
charging the battery before it is fully drained.
For a quick check of your battery level, view the battery charge icon located on the right side of
the status bar.
indicates that the phone is fully charged. The number of white bars
decreases as your battery discharges (
). When your battery level becomes low (approx.
15%), the battery icon turns to
and the phone sounds a warning tone, vibrates, and displays
a low battery message. When the battery drops to a more critical level (approx. 5%), the battery
icon turns to
and starts blinking. The alert tone, vibration, and message will repeat when the
remaining battery reaches each lower level.
Note:
Watch your phone’s battery level and charge the battery before it runs out of power.
Remove the battery
If you need to remove the Battery, follow these steps:
1. Make sure the power is off so that you don’t lose any stored numbers or messages.
2. Insert a coin into the slot on the battery cover screw and turn it counter-clockwise to
open the battery cover.
3. Starting at the edge of the sticker, peel the visible portion until it is standing up from the
battery; then, use this portion to pull the battery out of its compartment.
