Kyocera DP-750, Service Manual, Page: 34 / 124

3LL/3LK
1-3-14
U404
Adjusting margins for scanning an original from the DP
Description
Adjusts margins for scanning the original from the DP.
Purpose
Make the adjustment if margins are incorrect.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode.
Adjustment
1. Press the start key.
2. Select the item.
*: Dual scan DP only.
3. Press the system menu key.
4. Place an original on the DP and press the start key to make a test copy.
5. Press the system menu key.
6. Change the setting value using the +/- keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
Figure 1-3-5
7. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
U403
(See the service manual
for the machine.)
U402
(See the service manual
for the machine.)
U404
Display Description
Setting
range Initial
setting Change in
value per step
A MARGIN Left margin 0 to 10.0 3.0 0.5 mm
B MARGIN Leading edge margin 0 to 10.0 2.5 0.5 mm
C MARGIN Right margin 0 to 10.0 3.0 0.5 mm
D MARGIN Trailing edge margin 0 to 10.0 4.0 0.5 mm
A MARGIN
(BACK)* Left margin (second side) 0 to 10.0 3.0 0.5 mm
B MARGIN
(BACK)* Leading edge margin (second side) 0 to 10.0 2.5 0.5 mm
C MARGIN
(BACK)* Right margin (second side) 0 to 10.0 3.0 0.5 mm
D MARGIN
(BACK)* Trailing edge margin (second side) 0 to 10.0 4.0 0.5 mm
Leading edge margin
(3.0 ± 1.5 mm)
Trailing edge margin
(2.0 ± 1.0 mm)
Left margin
(2.0 ± 1.0 mm)
Right margin
(2.0 ± 1.0 mm)