7
INSTRUCTIONS FOR SAFE HANDLING
1. Make sure that the tool is only connected to the voltage marked on the name
plate.
2. Never use the tool if its cover or any screws are missing. If the cover or screws
have been removed, replace them prior to use. Maintain all parts in good
working order.
3. Always secure the tool when working in elevated positions.
4. Never touch the blade, drill bit, grinding wheel or other moving parts during use.
5. Never start a tool when its rotating component is in contact with the workpiece.
6. Never lay the tool down before its moving parts have come to a complete stop.
7.
ACCESSORIES
: The use of accessories or attachments other than those
recommended in this manual might present a hazard.
8.
REPLACEMENT PARTS
: When servicing, use only identical replacement parts.
DISPOSAL OF THE EXHAUSTED BATTERY
Li-ion batteries must be recycled.
Take the tool to the shop from which it was purchased as soon as the post-charging
battery life becomes too short for practical use.
Do not discard the exhausted battery.
DESCRIPTION
1. Tool holder
2. Indicator for right rotation
3. Indicator for left rotation
4. Charger light
5. Trigger
6. LED
7. Reversing switch
8. Jack (tool)
9. Driver bit
10. Charging stand
11. Charger
12. Jack
(Charging stand)
13. Plug
14. Tool terminal
15. Terminal for charging
Summary of Contents for BDX-2
