9
MOUNTEING THE BIT (Fig.3)
Insert the driver bit (9) directly into the hexagon collet.
TRIGGER (Fig.4)
This tool is started and stopped by pressed and releasing the trigger (5).
This tool is equipped with dual LEDs (6) to illuminate the tip of a bit.
LED is lit by pressing the trigger.
CHANGING THE ROTATIONAL DIRECTION (Fig. 4)
The reversing switch (7) changes the directional rotation of the machine. Do not
change when the trigger (5) is being pressed.
Right Rotation
Push the reversing switch to the left as it will go (for screwing in screws). The indi
-
cator for right rotation (2) lights up when rotating.
Left Rotation
Push the reversing switch to the right as it will go (loosening or unscrewing screws).
The indicator for left rotation (3) lights up when rotating.
SPINDLE LOCKING
The spindle (tool holder) is locked when the trigger (5) is not pressed.
This enables screws to be screwed in or unscrewed by hand.
Note:
No function of adjusting the fastening torque.
Slight adjustment is possible to be fastened by hand.
Note:
Do not use any attachments or accessories not recommended by the manu-
facturer of this tool.
OVERLOAD PROTECTION
This tool is equipped with the overload protection circuit to avoid causing the damage
to the tool and the battery. When being loaded over 3.5N
.
m torque, the tool stops
even if the trigger is pressed.
Summary of Contents for BDX-2
