Safety Precautions
●
The product may become warm while
charging, depending on the situation, but this
is not abnormal.
●
Remove the battery pack after turning off the
product. Data stored in the product may
sometimes be altered or lost by removing the
battery pack before turning off the product.
●
Do not place near corrosive chemicals or in
places where corrosive gas is generated.
Doing so may cause malfunction.
●
Do not use outside when you can hear
thunder. Doing so might risk lightning strikes
and electric shock.
●
Be sure to use only the specified peripheral
devices. Use of other peripheral devices
might cause malfunction.
●
Do not put the product in a cooking
apparatus such as microwave oven or a
pressure vessel. Doing so may cause
malfunction.
●
The customer is not allowed to disassemble,
modify or repair the product. Doing so may
cause malfunction. Modification of the
product is in violation of the Radio Law and
Telecommunications Business Law.
●
To prevent short-circuiting of the connection
terminal, do not allow your fingers or any
other part of your body or conductive
materials (metal, pencil lead, etc.) to come in
contact with or enter these areas. Doing so
may cause malfunction.
●
In the event that the product gets wet while
charging, immediately disconnect the power
plug of the specified charger (sold
separately).
●
Do not use the product while driving a car or
riding a motorbike or bicycle or while walking.
Use of a mobile device while driving a car or
motorbike is prohibited by law. Use of a cell
phone while riding a bicycle may be
punishable by some regulations.
●
Using or charging the product in a bag or
while it is covered with bedding might cause
malfunction.
●
When using a specified charger (sold
separately) or external device, insert/remove
the connector straight to/from the terminal.
Improper connection may cause a fault.
●
Do not expose the camera lens to direct
sunlight for an extended period. Doing so may
cause malfunction.
31
