32
Reference Guide for the QCP 3035 Phone
Network
Digital or analog mode
1.
Select
Menu
→
Settings
→
Network
→
Digital or Analog
.
2.
Press
in to select an option:
•
Automatic—
Automatically switches the phone between digital and analog.
•
Analog only—
Sets the phone to work in analog mode only.
•
Analog call—
Forces a call into analog mode for the duration of the next call.
•
Digital only—
Sets the phone to work in digital mode only.
Roam Option
This setting determines which signals your phone will accept.
1.
Select
Menu
→
Settings
→
Network
→
Roam Option
.
2.
Press
in to select an option:
•
Automatic
(recommended setting)—Accepts any system the phone service
provides.
•
No Roaming—
Prevents you from making or receiving calls outside of your
home service area.
Roam/Service Alert
Use this setting to have the phone alert you when you roam outside of your home
service area.
1.
Select
Menu
→
Settings
→
Network
→
Roam/Srvc Alert
.
2.
Press
in to select an option:
•
Disabled—
You are not alerted if you roam outside your home service area.
•
When no service—
Alerts you when service is lost. When service is
re-acquired, you will be alerted again.
•
On roam change—
Alerts you when roaming service is acquired. When
home area service is acquired again, you will be alerted again.
•
On any change—
Alerts you if there is a change in roaming service or if the
phone loses service.
Privacy Alert
1.
Select
Menu
→
Settings
→
Network
→
Privacy Alert
.
2.
Press
in to select an option:
•
Enabled—
Plays an audible alert whenever enhanced privacy is lost or
regained and a call is in progress.
•
Disabled—
No alerts are used.
Note
An alert message always shows on the screen, regardless of these settings.
