Kyocera Mita Ecosys FS-1010, Service Manual

Page: 155 / 172

B-3
FS-1010
Status page
The printer can print different types of the status page—the user (normal) status page and the
service status page. This section exclusively describes information obtainable with the service status
page. For information on the user (normal) status page, refer to the printer’s User’s Manual .
Information on the service page include various settings for the printer, service statistics, etc. To
print a service status page, proceed as follows:
Printing the service status page
To print a service status page, using the Go key on the operator panel. Or, have a PC running MS-
DOS and proceed as follows:
Go key
[Prints a user status page]
Press the Go key for 3 seconds or more and less than 10 seconds.
[Prints a service status page]
Press the Go key for 10 seconds or more.
PC
1
Connect the printer to the PC via the parallel interface.
2
Ensure that the printer is ready to print.
3
At the DOS prompt, type:
echo !R! STAT 1; EXIT; >lpt1:
The service status page is printed. (If you omit ‘1,’ a user status page is printed.)