Kyocera Mita Ecosys FS-1010, Service Manual

Page: 140 / 172

6-28
FS-1010
(9) Dirt on the top edge or back of the paper
Check toner contamination in various parts.
• Dirty edges and back of the paper can be caused by toner accumulated on such parts as the paper
chute, paper transportation paths, the bottom of the process unit, and the fuser unit inlet. Clean
these areas and parts to remove toner.
Check the transfer roller.
• If the transfer roller is contaminated with toner, clean the transfer roller using a vacuum cleaner;
or by continuously printing a low-density page until the symptom has faded away.
ABC
123