KYMCO Vitality 50, Manual, Page: 54 / 275

3
. INSPECTION/ADJUSTMENT
3-6
VITALITY 50
3.Remove the oil filler bolt (1) and drain
plug (3) to drain the oil.
4.Reinstall the drain plug and tighten it.
Torque : 1.0 1.5kgf-m
5.Fill the engine with oil and install the oil
filler blot.
6.Start the engine and warm up for a few
minutes. While warming up, check for oil
leakage. If oil leakage is found, stop the
engine immediately and check for the
cause.
LUBRICATION SYSTEM
(2-STROKE)
Oil Filter Cleaning
Remove:
Met-in box ( 13-5)
Spark plug cover ( 13-5)
Center cover ( 13-6)
Disconnect the oil tube from the oil pump
side and allow oil to drain into a clean
container.
Remove the tube clip from the oil tank side
and disconnect the oil tube.
Remove the oil filter.
4-Stroke
Add gear oil through the oil check bolt
hole (2).
After refilling, use a rag to wipe clean.
Excess or insufficient gear oil will
affect the engine performance.
Never use gear oil of different brand or
inferior quality which may result in
engine breakdown.