20
OPERATION
1. Visually inspect the handlebars
1
for any damage.
2. Apply the front brake (right lever) and press down and re-
lease pressure on the handlebar and listen for any abnor-
mal noise.
3. As you press down and release, feel for any looseness from
the chassis transmitted to the handlebar.
4. Turn the handlebar from the center fully to the left and then
fully to the right, feeling for any loose components and lis-
ten for any abnormal sounds.
PRI - Steering & handlebar inspection
Before riding, inspect your scooter’s handlebars for damage
and to make sure the steering’s side-to-side and up-and-down
movement is smooth.
If you detect any looseness or abnormal sounds dur-
ing your steering inspection, do not ride your scooter.
Consult your KYMCO dealer for chassis service.
PRI - Instrument inspection
Before your ride, and as you begin your ride, make sure the
instruments are functioning.
1. Is the fuel level gauge needle
5
indicating the fuel level?
2. Do the indicator lights (turn signal
2
and high beam
4
)
function?
3. Does the speedometer needle
3
move as the scooter
moves?
NOTE: Contact your KYMCO dealer for repair of your
scooter’s instruments if they are not functioning properly.
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
5
5
5
5
5
2
2
2
2
2