8
Use the ignition key to operate the ignition switch and the
steering lock:
Keys
Your Super 8 scooter is supplied with two identical ignition
switch keys
1
. The ignition key operates the ignition switch,
and the steering lock, and is used to open the seat to gain
access to the under-seat storage compartment.
NOTE: The keys have a unique
code stamped on the tab supplied
with the keys. This code is not
stamped on the scooter or re-
corded in the vehicle's basic docu-
mentation (for security reasons).
Since this code is required to ob-
tain replacement keys, record this
important code in the box provided
on the inside, rear cover of this Owner's Manual.
Ignition switch & Steering lock
After locking the ignition switch, turn the handlebar gen-
tly to confirm that the steering is locked.
Do not turn the ignition switch to the lock position when
riding, as this could cause the steering to lock and re-
sult in you losing control of your scooter. Do not park
your scooter in a position that will interfere with vehicle
or pedestrian traffic.
CONTROLS & FEATURES
1
1
1
1
1
OFF Position: All electrical
circuits are off. The engine will
not start or run. The key can
be removed from the ignition
switch.
LOCK Position: To lock the steering,
turn the handlebar all the way to the left,
push in and turn the key to the "LOCK"
position and remove the key. All electri-
cal circuits are off and the key can be re-
moved.
ON Position: The ignition circuit is
"ON" and engine can now be started.
The key cannot be removed from the
ignition switch in this position.
