KYMCO People GT 200i, Service Manual

Page: 129 / 219

13. FUEL INJECTION SYSTEM
13-2
People GT 200i
SPECIFICATIONS
ITEM SPECIFICATIONS
Throttle body identification number LGE6
Idle speed 1600±100 rpm
Throttle grip free play 2
～
6 mm (1/16
～
1/4 in)
Fuel injector resistance (at 20°C/68°F) 11.7±0.6
Ω
Float at full position 100±3 Ω Fuel pump resistance
(at 20°C/68°F)
Float at empty position 1100±33 Ω
Fuel pump standard pressure (at 40 L/Hr) 294±6 kPa (3 Bar)
At -20°C/-4°F 18.8 K Ω
At 40°C/104°F 1.136 K Ω
Water temperature
sensor resistance
At 100°C/212°F 0.1553 K Ω
Intake pressure sensor (MAP) pressure (at 1
～
4.2 V)
13.332 kPa (0.13332 kgf/ cm
2
, 1.89 psi)
～
119.99 kPa (1.1999 kgf/ cm
2
, 17.04 psi)
Inductive ignition coil
Primary: 3.57~4.83
Ω
Secondary: 10.42~14.49K
Ω
Throttle position sensor (TPS) resistance (at
20°C/68°F)
3500~6500
Ω
Crank position sensor voltage (at 200 rpm) 100~130
Ω
O
2
heater sensor resistance (at 20°C/68°F) 6.7
～
9.5 Ω (engine warming condition)
Standard 0.4
～
1.4 V
Tilt switch voltage
Over 65° (fall down) 3.7
～
4.4 V