KYMCO People GT 200i, Service Manual

Page: 7 / 219

1. GENERAL INFORMATION
1-4
People GT 200i
„
After operation, terminal caps shall be
installed securely.
„
When taking out the connector, the lock on
the connector shall be released before
operation.
„
Hold the connector body when connecting
or disconnecting it.
„
Do not pull the connector wire.
„
Check if any connector terminal is bending,
protruding or loose.
„
The connector shall be inserted
completely.
„
If the double connector has a lock, lock
it at the correct position.
„
Check if there is any loose wire.
„
Before connecting a terminal, check for
damaged terminal cover or loose negative
terminal.
„
Check the double connector cover for
proper coverage and installation.
„
Insert the terminal completely.
„
Check the terminal cover for proper
coverage.
„
Do not make the terminal cover opening
face up.
„
Secure wire harnesses to the frame with
their respective wire bands at the
designated locations.
Tighten the bands so that only the
insulated surfaces contact the wire
harnesses.
„
After clamping, check each wire to make
sure it is secure.
Confirm
Capacity