KYMCO Kymco UXV 500i, Service Manual

Page: 397 / 426

22. FUEL INJECTION SYSTEM
22-12
UXV 500i
Blinks Failure
Codes
Fault description Priority Fault management
5 P1122
Throttle position sensor
movement speed
problem
2
1.Make sure if the connector of Throttle position
sensor is connected correctly.
2.Check if the Throttle position sensor is adjusted.
6 P0560 Battery voltage
malfunction
1 1. Check if the battery voltage is lower or higher.
2.Check if the charge system is malfunction.
7 P0110 Intake air temperature
circuit malfunction
2
Inlet air temperature sensor or electric circuit
malfunction
8 P0410 Idle air valve circuit
malfunction
2
1. Check if the connector of Idle air valve loosen.
2.Check if the resistance of valve is normal.
9 P0505
Idle speed volume
control range problem
3
1.Check if the ISC steps range over 65 steps .
10 P0251 Injector or electric
circuit problem
2
1.Check if the connector of Injector is loosen.
2.Check if the ECU send signal to Injector.
3.Check if the power source and resistance of Injector
are malfunction.