KYMCO Kymco UXV 500i, Service Manual

Page: 293 / 426

15.
REAR WHEEL/SHOCK
ABSORBER/SWING ARM
15-2
UXV 500
SERVICE INFORMATION
GENERAL INSTRUCTIONS
•
Jack the machine front wheel off the ground and be careful to prevent the machine from falling
down.
•
During servicing, keep oil or grease off the brake disk
•
Inspect the brake system before riding.
SPECIFICATIONS
Unit: mm (in)
Item Standard Service Limit
Radial
⎯
2 (0.08)
Axial
⎯
2 (0.08)
TORQUE VALUES
Rear wheel nut 5.5 kgf-m (55 N-m, 40 lbf-ft)
Rear shock absorber upper mount bolt 4.5 kgf-m (45 N-m,32 lbf-ft)
Rear shock absorber lower mount bolt 4.5kgf-m (45 N-m, 32 lbf-ft)
Rear wheel hub nut 20 kgf-m (200 N-m, 145 lbf-ft)
Right pivot bolt 11.8 kgf-m (118 N-m, 85 lbf-ft)
Left pivot bolt 1.1 kgf-m (11 N-m, 8 lbf-ft)
Left pivot lock nut 11.8 kgf-m (118 N-m, 85 lbf-ft)
Final gear case mounting bolt 5.5 kgf-m (55 N-m, 40 lbf-ft)
Axle housing mounting bolt 5.5 kgf-m (55 N-m, 40 lbf-ft)
SPECIAL TOOLS
Oil seal & bearing driver A120E00014
TROUBLESHOOTING
Rear wheel wobbling Soft rear shock absorber
•
Bent rim
•
Weak shock absorber spring
•
Faulty tire
•
Faulty damper
•
Axle not tightened properly
Rim run out Rear wheel