KYMCO 125 DINK -, Service Manual

Page: 258 / 400

14. DINK 200 i:
FUEL SYSTEM (Auto Control Fuel Injection System)
14-16
Blinks
Failure
Codes
Fault description Priority Fault management
21 P0105 Manifold pressure fault 2
1.Confirm whether the output voltage
of the sensor is within
specification?
2.Check whether the output pin
position of the sensor is correct or
open circuit occurs? (the ECU pin
8)
3.Replace with a new sensor
according to the part-exchanging
process to confirm whether the
error code still exists?
22 P1110 Angle detect sensor fault 2
1.Confirming the sensor know the
machine outputs electric voltage
whether in the specification?
2.Does confirming the sensor know
the machine deals with contact,
connects line and hasn't moved
and break road? (the ECU pin 11)
3.If still appear an abnormality,
change to turn to pour sensor to
know lately the machine confirms
whether does the sensor know a
machine abnormality?
23 P0136 O2 sensor circuit malfunction 1
1.Check the connector or pin.
2.Replace with a new part.
24 P0141
O2 heater/O2 sensor circuit
malfunction 2
Does not have the information.
25 P0171 Close loop fault 1
Close loop correction value out of
the range, check the engine CO%.