This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.
- KYMATI GmbH – 2021
KY.MAN.0164 (2.0)
KY-RAY 3D.03.01 User Manual
Doc.- No.: KY.MAN.0164
Version:
2.0
Date:
16.06.2021
Page:
19 of 36
4.3
Interfaces
A brief description of the interfaces is given below.
Figure 10: KY-RAY 3D.03.01 Physical Interfaces
(1)
Plug for DC – IN / RS-485 (X1)
Power/RS-485 connector (X1) to power the device and to communicate via RS-485
(2)
Ethernet (X2)
Ethernet connector (X2) to communicate with the device and to power the device via
PoE (802.11af).
(3)
Pressure Valve
The pressure valve ensures that temperature changes do not cause any water
ingression into the housing as well as prevents overpressure in case of heat.
(4)
Power LED
(5)
Status LED
(6)-(9) Information LEDs
All LEDs are described in chapter 4.6
Use connector covers if connectors are not used. The
specified IP rating is only given with connectors or
covers mounted.
