KYLAND KIEN6000T, User Manual, Page: 30 / 50

KIEN6000T Industrial Ethernet Switch User’s Manual
Kyland Telecom
-
22
-
when taken out from the packing box, the rear panel of KIEN6000T has already fitted
with a green plastic connector socket for DIN rail. Rail mounting dimensions are
shown in Figure 4-1. If it is necessary to mount KIEN6000T on DIN rail, check the
mounting conditions of DIN rail before mounting, including the following two items:
1
．
Whether DIN rail is firmly fixed, whether any other equipment is fitted DIN
rail, whether there is adequate space for mounting KIEN6000T.
2
．
Whether there is power inlet on DIN rail suitable for KIEN6000T operation.
Kyland Telecom
Model:
S/N:
INPUT:DC18~36V @ 6VA
KIEN6000T-2M
E6T2M050068
http://www.kyland.com.cn
Made In China
Invisible laser radiation.
Do not stare into beam or
view directly with optical
instruments.
CAUTION!
The casing is part of the
heat sink design , and
may be hot to the touch.
CAUTION!
Rail
DIN
Rai l
Connect i ng
Seat
Figure 4-1 Rail mounting dimension of KIEN6000T
After selecting the proper position for mounting KIEN6000T, mount KIEN6000T on
DIN rail according to the following procedures:
1. Insert the lower part of DIN rail into the fixing slot with spring supporting in the
lower part of the DIN rail connector socket. Slightly rotate the equipment upwards
from bottom panel of KIEN6000T as shown in Figure 4-2 a.
2. As shown in Figure 4-2 b, clip DIN rail into the DIN rail connector socket, and
ensure that KIEN6000T equipment has been reliably mounted on DIN rail.