KYLAND KIEN6000T, User Manual, Page: 24 / 50

KIEN6000T Industrial Ethernet Switch User’s Manual
Kyland Telecom
-
16
-
voltage of the relay terminal is DC30V and the maximum input power 24VA.
Figure 3-6 is the schematic diagram of the equipment when it is connected an
alarming indicator and the wiring method for other applications is similar.
Its wiring and mounting procedures are the same as those of power terminal.
Power Gr ound -
DC30V MAX.
+
Ter mi nal Locki ng Scr ews
Locki ng Scr ews f or Power Cabl es
24VA MAX.
Figure 3-6 External alarming lamp of alarming relay output
Network management interface
(
CONSOLE)
The network management interface of KIEN6000T is shielded RJ45
connector and its interface communication standard is 3-wire RS232.
Users can the network management cable with end bearing RJ plug and
another end DB9F plug to connect the network management interface of
KIEN6000T
with the 9-pin serial port of the control computer. Operating
the local management software provided by KYLAND Telecom in the
control computer allows configuration, enquiry and management of the
KIEN6000T equipment directly connected with the serial port of the control
computer. Connection of network management cable with the local terminal
network management interface to operate the network management software
provided by KYLAND Telecom in the control computer allows to realize the
configuration, enquiry and management functions of all KIEN6000T
equipments within the entire network (The instructions for the operation of
network management software and the local terminal network management
interface is provided in Chapter 5 and 6 of this manual).
The wiring sequence for network management interface of KIEN6000T and the
9-pin serial port of PC computer is shown in Figure 3-7.