SICOM6000 User’s Manual
-2-
z
The fiber ring network redundancy technology with recovery time less than 50ms, raising
the reliability of system communication
z
Supports IEEE802.1Q‐based VLAN with up to 4094 VLANs
z
Supports DT‐Ring protocols, STP/RSTP/MSTP, VRRP, etc
z
Supports static routing, equivalence routing, policy routing and multiple dynamic routings,
such as RIPv1/v2, OSPF v2, BGP v4, etc.
z
Supports multicast routing protocols: IGMP, PIM‐SM, PIM‐DM, DVMRP
z
Backplane switching capacity is 36Gbps, hardware routing, forwarding layer 3 switching
packets with wire‐speed
z
Routing address table size is 30K
z
Supports QoS policy and multi‐queues scheduling algorithm
z
Supports SNMP, RMON (1, 2, 3, 9), TELNET, CLI, etc. network management protocols
z
Supports hardware ACL function, providing ACL hardware filtering from L2‐L7
z
Supports IGMP Snooping detection function
z
Supports broadcast storm control
z
Supports full duplex and half duplex mode flow control
z
Supports rate limitation with the step of n
×
64K
z
Reliability: MTBF
≥
50000hours, MTTR<0.5hour
z
Supports alarm functions including power alarm, IP collision alarm, MAC collision alarm, ring
alarm
z
FTP/TFTP‐based online software update, easy for user’s device management and renewal
z
SICOM6000 supports graphical network configuration, management and maintenance
functions, remote monitoring network operation state and performance, providing network
fault detection, diagnosis, locating and alarm.
2.
Industrial
Power
Design
Support industrial power supply: 12VDC (9‐18VDC), 24VDC (18~36VDC), 48VDC (36~72VDC)
Power input with over‐current, over‐voltage and EMC protection
