Switch Installation
6
install the mounting brackets, other small screw holes (M3) are used to fasten gaskets. If
there are screws inserted in screw holes (M4), remove the screws and keep them for future
use.
As shown in the following figure, use three screws to secure two mounting brackets to the
switch respectively.
Figure 5 Installing Mounting Brackets
Mounting
Step 1: Select the mounting position for the device and guarantee adequate space and heat
dissipation for it (dimensions: 440mm×88mm×325mm).
Step 2: Move the switch in direction 1 until the screw holes for securing the mounting
brackets to rack posts are in alignment with the corresponding holes in the rack
posts. Then use four screws and supporting captive nuts to secure the mounting
brackets to the rack posts.
Figure 6 Mounting by Front Panel
