Switch Access
21
Step 6: Click OK to enter the switch CLI. Then you can run the following commands to
perform operations.
Table 12 CLI Commands
View
Command
Description
User view
SWITCH>enable
Enter the management view.
Management view
SWITCH#show interface
Query the IP address of the switch.
Management view
SWITCH#show version
Query the version of the switch.
Management view
SWITCH#reboot
Restart the switch.
Management view
SWITCH#load default
Restore the factory default settings
Management view
SWITCH#config terminal
Enter the configuration view.
6.2 Access through Telnet
Step 1: Connect the network port of a PC to the Ethernet port of the switch with a network
cable.
Step 2: Enter "telnet IP-address" in the Run dialog box, as shown in Figure 19. The default
IP address of a Kyland switch is 192.168.0.2.
Figure 19 Access through Telnet
Step 3: Click OK. The Telnet CLI is displayed. Then you can enter commands (as shown in
Table 12) to perform operations.
6.3 Access through Web
Step 1: Connect the network port of a PC to the Ethernet port of the switch with a network
