Connection
16
Figure 20 Connection of 5-Pin 5.08mm-Spacing Plug-in Terminal Block
Caution:
The switch supports 220AC/DCW, 220AC/DC, 48DC, and 24DC power input. Before connecting the
device to power supply, make sure that the power input meets the power requirement. If connected to an
incorrect power input, the device may be damaged.
Warning:
Do not touch any exposed conducting wire, terminal, or component with a voltage warning sign,
because it may cause damage to humans.
Do not remove any part or plug in or out any connector when the device is powered on.
4.6 Alarm Terminal Block
The device provides an alarm terminal block on the rear panel for alarm output. When the switch
works properly, the normally-open contacts of the alarm relay are closed and the normally-closed
contacts are open; when an alarm occurs, the normally-open contacts are open and the
normally-closed contacts are closed. The alarm is outputted through a 3-pin 3.81mm-spacing
plug-in terminal block.
