Connection
12
Figure 14 Connection Using Straight-through/Cross-over Cable
Note:
The color of the cable for RJ45 connector meets the 568B standard: 1-orange and white, 2-orange,
3-green and white, 4-blue, 5-blue and white, 6-green, 7-brown and white, and 8-brown.
4.2 100Base-FX Ethernet Port
100Base-FX Ethernet port is equipped with FC/ST/SC connector, and each port consists of TX
(transmit) port and RX (receive) port. To enable data transmission between Device A and Device B,
connect the TX port of Device A to the RX port of Device B, and the RX port of Device A to the TX
port of Device B. The following uses an SC port as an example. The wiring sequence of an ST/FC
port is the same with that of the SC port.
Figure 15 Connection of 100Base-FX Ethernet Port
Caution:
The device uses laser to transmit signals in fibers. The laser meets the requirements of level 1 laser
products. Routine operation is not harmful to your eyes, but do not look directly at the fiber port when the
