Mounting
9
similar to those for mounting by front panel. Before installation, make sure that the following
requirements are met.
1) Environment: temperature (-40
℃
to 85
℃
), ambient relative humidity (5% to 95%,
non-condensing)
2) Power requirement: The power input is within the voltage range of the switch.
3) Grounding resistance: <5
4) No direct sunlight, distant from heat source and areas with strong electromagnetic interference.
Installing Mounting Brackets
Figure 10 Mounting Bracket
You can select the screw holes for front or rear panel mounting to install the mounting brackets. If
there are screws inserted in the screw holes, remove the screws and keep them for future use.
As shown in the following figure, use three screws to secure two mounting brackets to the switch
respectively.
Figure 11 Installing Mounting Brackets
Mounting
Step 1: Select the mounting position for the switch and guarantee adequate space and heat
