KYLAND Technology PTS-DR200 Operation Manual Download

Page: 26 / 55

Kyland Technology (Shanghai) Co., Ltd PTS-DR200 Time Server

- 24 -

Items

Parameters

Description

OCT

NOV

DEC

Start Time

00:00~24:00

Set start parameters for DST starting time.
Set start time to define what time to start DST.
Format is 24 hours format.
Range is between 00:00 and 24:00.
Default value is 00:00.

The Daylight Saving Time (DST) will define by what month,

week, day and time to start.

Stop Index

Last

Set stop parameters for DST stopping time.
Set stop index number to define week index in month.

The Daylight Saving Time (DST) will define by what month,

week, day and time to stop.

Stop Weekday

MON

TUE

WEN

THU

FRI

SAT

SUN

Set stop parameters for DST stopping time.
Set stop weekday to define day index in week.

The Daylight Saving Time (DST) will define by what month,

week, day and time to stop.

Stop Month

JAN
FEB

MAR

APR

MAY

JUN

JUL

AUG

SEP

OCT

NOV

DEC

Set stop parameters for DST stopping time.
Set stop month to define month index in year.

The Daylight Saving Time (DST) will define by what month,

week, day and time to stop.

Stop Time

00:00~24:00 Set stop parameters for DST stopping time.

Summary of Contents for PTS-DR200
























































Search results

Summary of Contents for PTS-DR200

Reviews:

Related manuals for PTS-DR200

Brands by name

Popular brands

KYLAND Technology PTS-DR200, Operation Manual

Search results

Summary of Contents for PTS-DR200

Reviews:

Related manuals for PTS-DR200

Brands by name

Popular brands