KIEN1005G User’s Manual 201106
9
Step 2: Drill 4 holes on the selected position according to the wall mounting dimension
drawings; use a cross‐screwdriver to screw 4 cross‐slot screws (M3
×
10) into holes.
Don’t tighten up the screws completely; leave about 5mm of space between.
Step 3: Aim 4 mounting holes on KIEN1005G mounting plate at 4 fixed screws; pass the
screws through 4 holes with the diameter of 6.5mm (Ф6.5); then slide down
KIEN1005G as seen below; finally screw 4 screws tightly. Now the KIEN1005G should
be firmly fixed to the wall or cabinet.
z
Remove
KIEN1005G
from
wall
or
cabinet
The specific steps are as follows:
Step 1: Use a screwdriver to loosen 4 screws; move the device up to let screws into 4 holes
with the diameter of 6.5mm (Ф6.5).
Step 2: Unscrew the screws from wall or cabinet; remove the device from wall or cabinet
