KIEN1005G User’s Manual 201106
7
Note
: The switch housing is a part of the heat dissipation system, which becomes hot during
operation. Please avoid contact.
Mounting
Steps
z
KIEN1005G
DIN
Rail
Mounting
The specific steps are as follows:
Step 1: Select the mounting position for KIEN1005G and ensure that there is enough space.
Step 2: Insert the top of the DIN‐Rail into the spring‐supported slot of the DIN‐Rail
connecting seat in the rear panel of KIEN1005G as seen below; move the device in the
direction of arrow 2 to put the whole Din‐Rail into the seat; check whether KIEN1005G is
firmly mounted on the DIN‐Rail, as shown below.
