!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
- 7 -
!!!!
Part two: Components assembly method
2.1
Main unit disassembly and assembly :
1. The main board has the function of power and Volume controlling, etc. and the
LED is placed in the Volume Knob.
2. Should take apart the Volume knob first and then change the LED if need repair or
change LED, on contrary, need open the front cabinet.
3. Should obey to the basic step and then could open the speaker box.
2.2
Front cabinet assembly and disassembly step
If no special Jigs or fixture, could use screwdriver, nail, solder iron, Multi-meter,etc.
instead.
Main box contents: Front and rear cover, screw, transducer, buzzer, PCBA
combination, Volume Knob, Switch button, clothing grille framework, 3.5 & stereo
cable.
Loose the 5pcs of screws from A to E in series which are fixed on the front panel and
cabinet (Refer to picture 1.1).
კ 2/2!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!
ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ
(picture 1.1)
Then grasping the two cable from the cabinet, open the cabinet; aiming at the center of the
master, press the cabinet and then place the 5pcs of screws from A to E(refer to picture 1.1)
in series. Please take note that one end of cable direction need close to the bottom.
ʳ ʳ
A
B
C
D
E